双向密封刀闸阀

进口双向密封刀闸阀性能描述 Performance description

双向密封刀闸阀的闸板关闭到位时通径无死角，根据流体分析设计冲力，自动冲解通径死角处杂物使介质通过更顺畅；内部设有弧形刮片使闸板在启闭工作全面积刮净表面使寿命更长，防止介质残留在阀腔，造成阀门开关不畅 RETZ品牌 When the gate of the two-way sealing knife gate valve is closed in place, there is no dead angle in the diameter. According to the fluid analysis, the impulse is designed to automatically flush the debris at the dead angle of the diameter to make the medium pass more smoothly; Arc scraper is set inside to make the gate clean in the full area of the opening and closing work, so as to prolong the service life and prevent the medium from remaining in the valve chamber, causing the valve to open and close smoothly

规格说明 Description

公称压力 Nominal Pressure：PN10/150LB 

规格尺寸 Size：2～32”

适用温度 Temperature: ≤ 80℃

开关形式 On-off form：手轮，伞齿轮，气动，电动 Handwheel, bevel gear, pneumatic, electric

密封形式 Sealing form

进口双向密封刀闸阀产品特性 Product characteristics

●阀杆保护套管，避免阀杆受到外部异物喷射 The valve rod protects the sleeve to prevent the valve rod from being sprayed by external foreign matters

●位置指示器，显示刀闸阀位置（与限位开关一同安装使用或仅安装位置指示器）retz品牌 Position indicator, indicating the position of knife gate valve (installed with limit switch or only with position indicator)

●一体式阀体，坚固抗变形，防止泄露 Integrated valve body, firm and anti deformation, preventing leakage

●U型阀座，U型橡胶密封圈，内设龙骨确保阀座强度 U-shaped valve seat, U-shaped rubber seal ring, with keel inside to ensure the strength of valve seat

●支架板，坚固、轻便。为环氧漆涂层钢或不锈钢，预留有限位开关、电磁阀和安全保护装置安装孔  The support plate is firm and light. For epoxy coated steel or stainless steel, reserve mounting holes for limit switches, solenoid valves and safety protection devices

●防腐蚀涂层环氧烤漆涂层 Anti corrosion coating Epoxy baking paint coating

零部件材质表 Parts material table