铝合金平行线夹紧式联轴器
简要描述：RETZ进口铝合金平行线夹紧式联轴器一体化结构，夹紧螺丝紧固方式，无间隙的轴和轴套连接,适用于正反转
品牌：RETZ- 工况条件：联接机械
- 温度/压力：0.5-15N.m.
- 更新时间：2023/03/21
进口铝合金平行线夹紧式联轴器 产品用途 Product use
1.整体采用高强度联轴器专用铝 Integrated structure, overall use of high-strength coupling dedicated aluminum
2.专为编码器以及微型电机设计 Designed for encoders and micro motors
结构特点 Structural features
弹性作用补偿径向,角向,轴向偏差 Elastic action compensates for radial, angular, and axial deviations
无间隙的轴和轴套连接,适用于正反转 Shaft and sleeve connection without clearance, suitable for forward and reverse rotation
弹簧式设计,带缓冲作用 Spring loaded design with cushioning
一体化结构，夹紧螺丝紧固方式 Integrated structure, clamping screw fastening method
基本参数 Basic parameters and dimensions
参数 | 额定 | 容许 | 容许 | 容许轴 | 最高 | 静态扭 | 惯性矩 | 主体 | 表面 | 重量 |
DIC-16x23 | 0.5 | 0.1 | 1.5 | ±0.2 | 9500 | 44 | 3.4x10¯7 | 高强度铝合金 | 阳极氧化处理 | 9.3 |
DIC-20x26 | 1 | 0.1 | 1.5 | ±0.2 | 7600 | 100 | 9.1x10¯⁶ | 16.5 | ||
DIC-25×25 | 22 | 0.15 | 1.5 | ±0.2 | 6100 | 165 | 2.3x10¯⁶ | 26 | ||
DIC-25x31 | 2 | 0.15 | 1.5 | ±0.2 | 6100 | 165 | 2.6x10¯⁶ | 29 | ||
DIC-28.5x38 | 3 | 0.15 | 1.5 | ±0.2 | 5500 | 180 | 4.5x10¯⁶ | 51 | ||
DIC-32x32 | 4 | 0.15 | 1.5 | ±0.2 | 5000 | 228 | 8.8x10¯⁶ | 56 | ||
DIC-32x41 | 4 | 0.15 | 1.5 | ±0.2 | 500 | 228 | 9.7x10¯⁶ | 65 | ||
DIC-38×41 | 6.5 | 0.2 | 1.5 | ±0.2 | 650 | 232 | 3.0x10¯⁵ | 107 | ||
DIC-40x50 | 8 | 0.2 | 1.5 | ±0.2 | 800 | 340 | 3.3x10¯⁵ | 142 | ||
DIC-50x50 | 15 | 0.2 | 1.5 | ±0.2 | 1000 | 580 | 9.0x10¯⁵ | 220 |
注：必须在容许值的范围内使用该联轴器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
参数 | 常用d1,d2,轴径 | φD | L | L1 | L2 | F | M | 紧固螺 |
DIC-16x23 | 3,4,5,6,6.35 | 16 | 23 | 0.55 | 1.4 | 3.18 | M2.5 | 0.8 |
DIC-20x26 | 4,5,6,6.35,7,8 | 20 | 26 | 0.55 | 1.5 | 3.75 | M2.5 | 1.2 |
DIC-25×25 | 5,6,6.35,7,8,9,9.525,10,11,12 | 25 | 25 | 0.6 | 1.7 | 4.84 | M3 | 1.2 |
DIC-25x31 | 5,6,6.35,8,9,9.525,10,11,12 | 25 | 31 | 0.6 | 1.8 | 4.46 | M3 | 2.5 |
DIC-28.5x38 | 6,6.35,8,9,9.525,10,11,12,14 | 28.5 | 38 | 0.8 | 2.1 | 5.62 | M4 | 2.5 |
DIC-32x32 | 8,9,9.525,10,11,12,14,15 | 32 | 32 | 0.8 | 2.3 | 5.3 | M4 | 2.5 |
DIC-32×41 | 8,9,9.525,10,11,12,14,15 | 32 | 41 | 0.8 | 2.3 | 6.6 | M4 | 2.5 |
DIC-38x41 | 8.9,9.525.10.11,12,14.15.16 | 38 | 41 | 0.8 | 2.7 | 5.4 | M5 | 5 |
DIC-40x50 | 10,11,12,12.7,14,15,16,19 | 40 | 50 | 0.8 | 2.7 | 8 | M5 | 5 |
DIC-50x50 | 12,12.7,14,15,16,19,20,22,24 | 50 | 50 | 0.8 | 2.9 | 7.22 | M6 | 8 |
在线客服