低温电磁阀

简要描述:RETZ进口低温电磁阀广泛应用冷媒等低温介质(液体、气体)、低温设备、液氮设备、冷却设备、实验设备等。低温流体:如制冷剂(沼(液氮、液氧、液氩、二氧化碳等

  • 品牌:RETZ
  • 工况条件:低温流体控制
  • 温度/压力:P-T: 40bar@-200℃
  • 更新时间:2023/04/10
产品详情 在线咨询

工作原理 working principle进口低温电磁阀3.jpg

原理结构:分步活塞式、一步活塞式

反冲式电磁阀(即零压差电磁阀)是直动式和先导式为一体的电磁阀。它既可在介质无压力的工况下靠线圈的吸力打开主阀塞,又可以在介质压力较高的工况下,使主阀塞产生压差而开启电磁阀。当线圈(1)通电,动铁芯(2)吸合,打开主阀塞上的泄压孔,同时带动主阀塞开启,介质流通,故介质无压力主阀塞靠线圈的吸力开启,介质有压力的情况下,主阀塞靠压差开启。反之亦然。The recoil type solenoid valve (i.e. zero pressure differential solenoid valve) is a direct acting and pilot operated solenoid valve that integrates. It can open the main valve plug by the suction of the coil under the condition of no pressure in the medium, and can also generate a pressure difference in the main valve plug and open the solenoid valve under the condition of high medium pressure. When the coil (1) is energized, the moving iron core (2) is pulled in, opening the pressure relief hole on the main valve plug. At the same time, it drives the main valve plug to open, allowing the medium to flow. Therefore, the medium has no pressure, and the main valve plug is opened by the suction of the coil. When the medium has pressure, the main valve plug is opened by the pressure difference. vice versa.

适用范围:此种电磁阀均可制造成常开式,但是反冲式电磁阀不适合在较高压力工况下使用。

Scope of application: This type of solenoid valve can be manufactured as a normally open type, but the recoil type solenoid valve is not suitable for use under high pressure conditions


技术参数

规格:1/4-12"  Specification: 1/4-12“进口低温电磁阀2.jpg

阀体材质:不锈钢 Valve body material: stainless steel

介质温度:-200~+100℃ Medium temperature: -200~+100 ℃

压力等级:0-0.5-40bar Pressure rating: 0-0.5-40bar

介质粘度:小于50C St(大于时需定制)Medium viscosity: less than 50C St (customized if greater than)

防护性能:防水、防爆(Exd IICT5)、防腐 Protective performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion

接线方式:接线座式;引线式;插头式 Wiring method: wiring base type; Lead type; Plug type

控制方式:常开、常闭 Control mode: normally open, normally closed

电源电压:DC24~127V;AC36~380V Power supply voltage: DC24~127V; AC36~380V

连接方式:螺纹、法兰(外螺纹和特殊接口可定做或加转接头)Connection method: thread, flange (external thread and special interface can be customized or equipped with adapter)


产品特点 Product Features

采用分步活塞式、一步活塞式、先导式结构 Adopting a step-by-step piston type, one-step piston type, and pilot type structure

阀芯均为不锈钢活塞式,活塞环用特殊耐温、耐磨材料制作 All valve cores are stainless steel piston type, and piston ring is made of special temperature resistant and wear-resistant materials

活塞与金属阀腔不产生直接摩擦,阀体安装方向无限制 There is no direct friction between the piston and the metal valve chamber, and the installation direction of the valve body is unrestricted

线圈采用散热的结构方式,因此不易烧毁 The coil adopts a heat dissipation structure, so it is not easy to burn out

长时间停止动作重新启动,动作同样灵敏 Long stop action and restart, equally sensitive action


常闭电磁阀,断电关闭,通电打开 Two position two normally closed solenoid valve, power off to close, power on to open

常闭线路图.jpg

常开型电磁阀,断电打开,通电关闭 Two position two normally open solenoid valve, power off to open, power on to close

常开线路图.jpg

产品中心
相关产品