多功能水泵控制阀

产品描述 Product Description

进口水泵控制阀安装在企业、高层建筑等给水系统的水泵出口处，防止介质倒流、水锤和水击现象的智能型阀门，该阀兼具电动阀、逆止阀和水锤消除器三种功能，可有效提高供水系统的安全可靠性，并将缓开、速闭、缓闭和消除水锤的技术原理一体化，防止开泵水锤和停泵水锤的产生。只需操作水泵电机启闭按钮，阀门即可按照水泵操作规程自动实现启闭，流量大，压力损失小，满足系统工程设备自动化的控制要求。

The imported water pump control valve is installed at the outlet of the water pump in the water supply system of enterprises, high-rise buildings, etc. It is an intelligent valve that prevents media backflow, water hammer, and water hammer phenomena. This valve combines three functions: an electric valve, a check valve, and a water hammer eliminator, effectively improving the safety and reliability of the water supply system. It integrates the technical principles of slow opening, fast closing, slow closing, and eliminating water hammer to prevent the occurrence of water hammer when starting and stopping the pump. Simply operate the water pump motor open/close button, and the valve can automatically open/close according to the water pump operating procedures. With high flow rate and low pressure loss, it meets the control requirements of system engineering equipment automation.

其特点如下：Its characteristics are as follows

1、采用双室驱动装置、Y型结构 Adopting dual chamber drive device and Y-shaped structure

2、介质在定向运动中具有半直线水流，过流量大、压力损失小、启闭运行平稳、不产生压力波动等优点 The medium has the advantages of semi linear water flow, large flow rate, small pressure loss, stable opening and closing operation, and no pressure fluctuations in directional motion

3、双室驱动装置可作为一个整体拆卸，便于检查 The dual chamber drive device can be disassembled as a whole for easy inspection

4、膜片采用尼龙强化橡胶制成，使用寿命长 The diaphragm is made of nylon reinforced rubber, with a long service life

5、阀瓣密封件可拆卸，维修更方便 The valve disc seal is detachable, making maintenance more convenient

结构和主要零件材质 Structure and main component materials

进口水泵控制阀为膜片式和活塞式两种，主要由主阀、过滤器、球阀和导管等组成 There are two types of control valves for imported water pumps: diaphragm type and piston type, mainly composed of main valve, filter, ball valve, and conduit

主要零件材质 Main component materials

工作原理 working principle

多功能水泵控制阀安装在系统管线上或泵出口处，泵开始正常运行中，进口端介质推动大阀瓣上移，同时介质通过导管控制器进入阀盖中腔，使阀门迅速打开；泵停止运动时，出口端介质通过球阀和导管进入阀盖上腔，使驱动装置下移带动大、小阀瓣向下运动，快速或缓慢关闭阀门，防止介质倒流

The multi-functional water pump control valve is installed on the system pipeline or at the pump outlet. During normal operation of the pump, the inlet medium pushes the large valve disc upwards, and at the same time, the medium enters the valve cover cavity through the conduit controller, allowing the valve to quickly open; When the pump stops moving, the medium at the outlet enters the upper chamber of the valve cover through the ball valve and conduit, causing the driving device to move down and drive the large and small valve discs to move downwards. The valve is quickly or slowly closed to prevent the medium from flowing back

全开状态 Fully open state

当水泵启动后，阀门进水口压力上升，压力水一方面推动主阀板开启，另一方面通过导管系统进入膜片（活塞）下腔，而膜片（活塞）上腔的水通过导管系统泄入压力低的阀门出水口，而阀门在二合力的作用下缓慢开启。

After the water pump starts, the pressure at the valve inlet rises. On the one hand, the pressure water pushes the main valve plate open, and on the other hand, it enters the lower chamber of the diaphragm (piston) through the conduit system. The water in the upper chamber of the diaphragm (piston) is discharged into the outlet of the low pressure valve through the conduit system, and the valve slowly opens under the combined force of the two forces

全闭状态 Fully closed state

当水泵停机后，阀门中的水流速度降低，在接于近零时，主阀板在弹簧力和自身重力作用下快速关闭，而阀后的压力水通过导管系统返回膜片（活塞）上腔，并推动固定阀杆上的小阀板缓慢关闭。

After the water pump stops, the water flow velocity in the valve decreases. When it is close to zero, the main valve plate quickly closes under the action of spring force and self gravity, while the pressure water behind the valve returns to the upper chamber of the diaphragm (piston) through the conduit system and pushes the small valve plate on the fixed valve rod to slowly close.

基本流量压差特性曲线图（Basic Flow and Differential Pressure Characteristic Graph）

安装与调试

安装

1、多功能水泵控制阀最佳安装方式为水平安装（即阀盖向上）。

2、安装前要仔细检查介质流向，避免安装错误。

3、管路应清理干净阀前安装过滤器，防止杂质影响产品性能，及损坏产品。

4、环境温度在0℃以下时，要做好保温工作。

5、多功能水泵控制阀安装应留有足够的空间，在止回阀后要安装控制阀。

调试

1、将调节杆旋至最高位置，开机后根据需要在进行调节。

2、打开截止阀

3、启泵观察阀门进出口压力是否正常。

4、停泵观察水锤是否过大，水泵是否倒转。

5、如水锤过大则适当关小截止阀。

6、如水泵倒转则适当开大截止阀。