首页 > 产品中心 > RETZ阀门/(瑞茨) > 水力控制阀 > 吸入口扩散器 泵吸入口过滤器

吸入口扩散器 泵吸入口过滤器

简要描述:RETZ进口吸入口扩散器、泵入口过滤器用于直接安装在泵的吸入端,具有特殊过滤设置能有效剔除杂物,比传统方式节省了不少空间

  • 品牌:RETZ
  • 工况条件:过滤
  • 温度/压力:P-T: 25bar@100℃
  • 更新时间:2023/04/21
产品详情 在线咨询

产品描述 Product Description

进口吸入口扩散器、泵入口过滤器集弯管、Y型过滤器及整流管功能,具有特殊过滤设置能有效剔除杂物。平直的整流板能够为泵提供平衡的水流,减少乱流对泵冲击和侵蚀,也能防止产生气锁现象。

The inlet diffuser, pump inlet filter manifold, Y-shaped filter, and rectifier tube have special filtering settings to effectively remove impurities. A straight rectifier plate can provide balanced water flow for the pump, reduce turbulence impact and erosion on the pump, and also prevent the occurrence of air lock phenomenon


性能参数 performance parameter

称压力(MPa)
Nominal pressure

试验压力Ps(MPa)Test pressure

适用介质
Suitable medium

工作温度(℃)
temperature

壳体Shell

水压密封Hydraulic seal

气压密封Pressurized seal

1.0

1.5

1.1

0.6

Water,

080

1.6

2.4

1.76

0.6

2.5

3.8

2.8

0.6

规格尺寸SIZE 2-20

结构特点Features

吸入口扩散过滤器自身可扩散流向,降低管道内的流速,在流动过程中又可适当的降低流速,也可通过内部导向板使流体分散并进口吸入口扩散器2.jpg均匀的分布流速,保障了泵的长期稳定的运转

The suction diffusion filter itself can diffuse the flow direction, reduce the flow rate in the pipeline, and appropriately reduce the flow rate during the flow process. It can also disperse and evenly distribute the flow rate through the internal guide plate, ensuring the long-term stable operation of the pump

1、常用于泵前吸入端,不仅过滤杂质,还能替代弯头、过滤器以及泵前吸入端的直管,从而降低成本 Commonly used at the suction end before the pump, it not only filters impurities, but also replaces elbows, filters, and straight pipes at the suction end before the pump, thereby reducing costs

2、因出、入端法兰规格可以是出口端小于入口端,因此它还可以取代异径弯头 Due to the fact that the specifications of the inlet and outlet flanges can be smaller at the outlet end than at the inlet end, it can also replace the reducing elbow

3、开孔面积大、排放口大,容易排水和冲洗,从而减少维修 Large opening area and large discharge port make it easy to drain and flush, thereby reducing maintenance

4、出口处为直导叶片设计,大大减少了涡流对泵及系统的损害 The outlet is designed with straight guide vanes, greatly reducing the damage of eddy currents to the pump and system


主要零件与材质(Major part material)

 No.

名称

材质

1

阀体

球墨铸铁或焊接不锈钢

2

阀盖

球墨铸铁或焊接不锈钢

3

整流板

球墨铸铁或焊接不锈钢

4

滤网

不锈钢

5

滤罩

不锈钢

6

螺栓

钢镀锌或不锈钢

7

垫圈

钢镀锌或不锈钢

8

密封圈

丁腈橡胶

9

螺塞

钢镀锌或不锈钢

10

支撑座

球墨铸铁外覆环氧树脂

11

螺母

钢镀锌或不锈钢

12

支撑螺栓

钢镀锌或不锈钢

安装示意图

安装示意图.jpg

产品中心
相关产品