RETZ进口品质 双腔隔膜式快开排泥阀

性能：用以排除池底的泥沙及污物

Performance: Used to remove sediment and dirt from the pool bottom

进口排泥阀产品详情 Product details

排泥阀采用双室隔膜传动机构替代活塞式，配套二位四通进口电磁阀可远距离控制排泥阀开关，利用液体或气体为动力，膜片、阀杆作为开关，无运动磨损，主要用途是它安装在各类沉淀水池、水箱的底部壁外，用以排除池底的泥沙及污物。

The mud discharge valve adopts a dual chamber diaphragm transmission mechanism instead of a piston type, and is equipped with a two position four way imported electromagnetic valve that can remotely control the opening and closing of the mud discharge valve. It uses liquid or gas as power, and the diaphragm and valve rod are used as switches, without movement wear. Its main purpose is to install it on the bottom wall of various sedimentation tanks and water tanks to remove sediment and dirt at the bottom of the tank.

进口排泥阀结构特点 Structural characteristics

1、采用双室隔膜传动机替代活塞式阀门：

无运动磨损；

不会因杂质而产生漏水：

对泥沙淤积不敏感：不需要润滑，无机械磨损产生。

2、密封性能好，采用衬胶阀板，阀座采用斜度开口不易沉积泥沙杂质。

3、驱动介质压力低，无需另设加压泵或空压机，采用手动换向阀或电磁四通换向阀集中控制，控制操作方便。

技术规范 Technical specifications

启只需20秒可打开阀板

工作压力∶1.0MPa

使用介质∶水

使用温度∶常温

工作介质∶气、清水

驱动压力∶0.15~0.5MPa

阀体∶HT200

隔膜上腔∶HT200

阀板∶ HT200

隔膜下腔∶HT200

阀杆∶不锈钢

拼帽∶A3钢

隔膜片∶耐磨丁腈橡胶和尼龙

口径:3"-10"